
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X15-10B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 15 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X15-10B is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw. Turning this R screw lets you dial the extend stop down from the 15 mm maximum to any position down to 5 mm directly on your machine, entirely eliminating the need for shims or part swaps.
This variant features a male M14x1.5 piston rod thread and a short riveted body that conserves axial mounting depth in tight machinery envelopes. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Please note this specific SKU lacks a piston magnet, meaning it cannot accept AirTAC reed or electronic switches for position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X15-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 15 mm |
| Adjustable range | 5 – 15 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the pusher stroke on-site during product changeovers to accommodate different package widths, saving axial space with the compact riveted body.
This model is ideal for operators who require precise on-site stroke tuning during frequent changeovers. Confirm your parameters: 40 mm bore, 15 mm maximum stroke, 10 mm adjust window, PT1/8 port, male M14x1.5 rod thread, and no magnet. Remember that a plain cylinder does not hold its load upon air loss or valve centering; the fixed bumper only decelerates the stroke end. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. It operates at speeds between 30 and 500 mm/s within a pressure range of 0.15-1.0 MPa.
The external M12x1.25 screw mechanically shortens the extend stroke by up to 10 mm, allowing you to set the end position anywhere between 5 mm and 15 mm without changing parts; retract remains full. This SKU has no piston magnet, so it cannot accept position switches. You would need the -S variant to use AirTAC reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.