
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X15-20B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 15 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X15-20B is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjuster screw that dials the extend stop down to a 0-15 mm window without part changes. The short riveted body minimizes axial mounting depth where round-body or profile cylinders cannot fit.
This specific SKU includes a male M14x1.5 piston rod end and lacks a piston magnet, meaning it cannot accept reed or electronic switches. End-of-travel deceleration is handled solely by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X15-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 15 mm |
| Adjustable range | 0 – 15 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 0-15 mm clamp contact point on the fly to compensate for material thickness variance without remachining stops.
Speed up product family changeovers by turning the M12x1.25 screw to shift the extend endpoint, achieving rapid format adjustments.
Choose this specific unit when your fixture requires a male-threaded M14x1.5 rod projection and on-site extend tuning between 0 and 15 mm.
Confirm your requirements for port size (PT1/8), the 20 mm adjustment window, and the absence of a magnet. Note that a plain cylinder does not hold position or load upon air loss or valve centering; the fixed bumper only decelerates near the end of travel. For suspended loads without live pressure, specify an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 128 kgf at 1.0 MPa.
The external M12x1.25 screw mechanically shortens the extend stroke down to 0 mm from the 15 mm maximum. It strictly sets the stop position and does not alter force or act as a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.