
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-10S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 140 to 150 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X150-10S is a compact double-acting double-rod cylinder engineered with an external adjustable extend stop. A built-in piston magnet enables position sensing with AirTAC reed or electronic switches. Because this 150 mm stroke exceeds the 130 mm standard catalog maximum for a 40 mm bore, it is produced as a non-standard made-to-order unit.
Turning the M12x1.25 adjuster screw lets you dial the extend end-position anywhere between 140 and 150 mm directly on the machine, avoiding part swaps. End-of-travel deceleration relies on a fixed NBR bumper rather than an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 150 mm |
| Adjustable range | 140 – 150 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop precisely between 140 and 150 mm via the M12x1.25 screw to set new jaw depths during production line format changes.
Fine-tune the extend endpoint on-site during prototype assembly runs without machining custom spacers or ordering alternate length cylinders.
This model suits applications requiring on-site stroke tuning during initial commissioning or tooling changeovers. Confirm your requirements for the 40 mm bore, 150 mm maximum stroke, 10 mm adjust window, PT1/8 port, female M8x1.25 rod thread, and the -S magnet. Note that a plain cylinder drifts when air is lost or the valve centers; utilize an external rod lock or pilot-operated check valve for secure load holding.
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The external R screw shortens the extend stroke by up to 10 mm, yielding a usable 140 to 150 mm range while retract remains full. The included -S magnet works with AirTAC reed or electronic switches for end-position sensing; the fixed NBR bumper handles end shock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.