verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-20B

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-20B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 130 to 150 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke150 mm
  • Adjustable range130–150 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$109.10 $116.60Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-20B

The SDAJ40X150-20B is a double-acting compact cylinder featuring an external M12x1.25 adjuster screw that dials the extend stop from 130 to 150 mm. This specific configuration includes a male M14x1.5 piston rod end and lacks a piston magnet.

The short riveted body drastically cuts axial mounting depth where round-body or larger profile units cannot fit. End-of-stroke kinetic energy is managed solely by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion. Note that the 150 mm stroke exceeds the 130 mm standard maximum for this bore, making it a non-standard, made-to-order item.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-20B Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke150 mm
Adjustable range130 – 150 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-20B

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×150Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-20B Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop precisely between 130 and 150 mm during machine changeovers to accommodate varying jig heights without fabricating new spacers.

straighten

Bending Stop Setup

Establish a repeatable metal forming stop position in a tight footprint, relying on the fixed NBR bumper to absorb the 32 kg vertical lift impact.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-20B the Right Cylinder?

When sizing this actuator, evaluate your force requirements bidirectionally. Engineers who require exact on-machine positioning without swapping components will benefit from the 20 mm external adjustment window.

Verify your installation parameters: a 40 mm bore, 150 mm maximum stroke, 20 mm adjustment window, PT1/8 air port, male M14x1.5 rod thread, and no piston magnet. Remember that a standard cylinder does not hold a load if air pressure drops or the valve is centered; the piston will drift. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Operating speed spans 30-500 mm/s.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 130–150 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-20B FAQ

At 0.7 MPa, push increases to 879.6 N and pull to 738.9 N. The theoretical maximum push force is 128 kgf at 1.0 MPa.

Turning the external M12x1.25 R screw mechanically shortens the extend end-position by up to 20 mm, allowing an adjustable range of 130 to 150 mm. This SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you would need the -S option for sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-20B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X150-20B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.