
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-30 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 120 to 150 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X150-30 is a double-acting compact cylinder featuring an external extend stop. An M12x1.25 adjuster screw lets you dial the outward stroke from 120 to 150 mm directly on the machine, avoiding shims or part swaps.
Its riveted body design minimizes axial mounting depth where space is tight. Note that this 150 mm unit exceeds the 130 mm standard stroke for a 40 mm bore, making it a non-standard, made-to-order item. End-of-travel deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 150 mm |
| Adjustable range | 120 – 150 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 120 and 150 mm to perfect the clamping depth on custom machining fixtures without machining new spacers.
Set precise downward travel limits for a 32 kg vertical lifting rig, using the M12x1.25 screw to fine-tune the landing position.
When sizing this actuator, compare it against neighbouring bores.
Choose this model if your fixture requires on-site stroke tuning across a 120-150 mm window. It features a 16 mm rod, a female M8x1.25 rod-end thread, and a PT1/8 port. Remember that a plain cylinder drifts when air is lost or the valve centres; the bumper and adjuster only manage the end stop, not load holding. For secure positioning without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
Turning the external M12x1.25 screw shortens the extend end position by up to 30 mm, giving a usable outward range of 120 to 150 mm. The retract stroke remains full. This screw acts strictly as a mechanical stop and does not alter the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.