
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-30S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 120 to 150 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X150-30S is a compact double-acting double-rod cylinder engineered for on-site stroke dialling. An external M12x1.25 adjuster screw lets you set the extend stop anywhere between 120 and 150 mm without changing parts.
This 150 mm unit is a non-standard made-to-order length, exceeding the 130 mm maximum standard stroke for this 40 mm bore. The short riveted body minimises axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Equipped with a built-in piston magnet (-S), it supports AirTAC reed or electronic solid-state switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 150 mm |
| Adjustable range | 120 – 150 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 120 to 150 mm during machine setups to accommodate different fixture heights without machining new spacers.
Iterate on exact extend endpoints during R&D trials, using the M12x1.25 screw to find the optimal travel before finalizing a design.
Choose this model if your assembly line requires frequent changeovers or trial positioning within the 120-150 mm window.
Confirm the 150 mm length and 30 mm adjustability suit your envelope, noting the PT1/8 port and 16 mm rod. The -S magnet enables position sensing, while the female M8x1.25 rod thread (or male M14x1.5 if modified) handles the load. Remember that a plain cylinder drifts on air loss; the bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The M12x1.25 screw shortens the extend stop from the 150 mm maximum down to 120 mm. The built-in magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.