
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-30SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 120 to 150 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X150-30SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M12x1.25 adjuster screw lets you dial the extend position anywhere between 120 and 150 mm directly on the machine, eliminating the need for shims or part swaps.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches and a male M14x1.5 piston rod thread. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that the 150 mm stroke exceeds the 130 mm standard maximum for this 40 mm bore, making it a non-standard, made-to-order length.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X150-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 150 mm |
| Adjustable range | 120 – 150 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stroke between 120 and 150 mm via the M12x1.25 screw during machine changeovers, ensuring precise positioning without disassembling the tooling.
When sizing this 40 mm bore actuator, evaluate your force requirements against its neighbours. Choose this model if your application requires precise on-machine stroke tuning within the 120 to 150 mm window.
Confirm the bore, 150 mm maximum stroke, 30 mm adjustment window, and PT1/8 air port match your pneumatic supply. This unit includes the -S magnet and the -B male M14x1.5 rod thread. Remember that a plain cylinder does not hold its load upon air loss or valve centring; the fixed bumper only decelerates near the stroke end. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. Operating pressure ranges from 0.15 to 1.0 MPa, with a speed of 30-500 mm/s.
The included -S magnet allows you to mount AirTAC reed or electronic solid-state switches directly into the body sensor grooves for position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.