verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-10SH

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-10SH is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 20 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke20 mm
  • Adjustable range10–20 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$56.26 $63.76Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-10SH

The AirTAC SDAJ40X20-10SH is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A built-in magnet and fluororubber (FKM) seal equip this unit for higher temperature or oil-exposed environments. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit.

Turning the R (M12x1.25) adjuster screw lets you dial the extend end-position down to 10 mm from the 20 mm maximum on the machine, avoiding shims or part changes. The end shock is managed solely by a fixed NBR bumper, meaning it decelerates the stroke end but is not an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-10SH Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-10SH
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke20 mm
Adjustable range10 – 20 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-10SH

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×20Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-10SH Is Used

precision_manufacturing

Tooling Calibration

Dial the extend stop from 10 to 20 mm during initial tooling calibration to find the exact contact point for a 628.3 N pressing action.

packaging

Flap Folding Arms

Adjust the mechanical stop on packaging lines to accommodate different carton depths without swapping out the entire actuator assembly.

science

High-Temp Test Rigs

Leverage the FKM seal and compact riveted body to actuate testing fixtures in heated environments where standard rubber seals would degrade.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-10SH the Right Cylinder?

Choose this specific unit when you require on-site stroke tuning between 10 and 20 mm without changing parts.

Confirm the 40 mm bore, 20 mm stroke, 10 mm adjustment window, and PT1/8 port. This configuration includes the -S magnet for AirTAC reed or electronic switches, plus the -H FKM seal. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 10–20 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-10SH FAQ

The theoretical maximum push is 128 kgf at 1.0 MPa.

The R (M12x1.25) screw shortens the extend stroke by up to 10 mm, yielding a usable 10 to 20 mm range. The included -S magnet works with AirTAC reed or electronic solid-state switches mounted in the body grooves for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-10SH

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X20-10SH and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.