
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-20B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X20-20B is a compact double-acting double-rod cylinder featuring an external extend stop. A built-in M12x1.25 adjuster screw lets you dial the outward stroke from 0 to 20 mm directly on the machine, eliminating the need for shims or part swaps.
This specific configuration includes a male-threaded M14x1.5 piston rod for secure mechanical attachments. The short riveted body minimizes axial mounting depth in tight fixtures. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this SKU lacks a piston magnet and cannot support position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 20 mm |
| Adjustable range | 0 – 20 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 0-20 mm extend stop during initial fixture setup to prevent over-travel on delicate machining heads.
Adjust the pusher stroke on the fly for different package widths without changing out the entire actuator assembly.
Set a precise mechanical lower limit for a 32 kg lift application, ensuring the load stops safely at the desired height.
Stepping down to an SDAJ32 yields 402.1 N, whereas stepping up to an SDAJ50 provides 981.7 N. Choose this 20 mm adjustable window model if your application requires frequent on-site stroke tuning or trial positioning.
Confirm your parameters: 40 mm bore, 20 mm maximum stroke, 20 mm adjustability window, and a PT1/8 air port. This variant features a male M14x1.5 rod thread and no magnet. Remember that a plain cylinder does not hold position or load when air is lost or the valve is centered; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 128 kgf at 1.0 MPa.
The M12x1.25 external screw mechanically limits the extend stroke, allowing you to set the outward position anywhere between 0 and 20 mm. It acts as a physical stop and does not alter the cylinder's pneumatic force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.