verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-20S

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-20S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 20 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke20 mm
  • Adjustable range0–20 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$48.82 $56.32Save 13% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-20S

The AirTAC SDAJ40X20-20S is a compact double-acting double-rod cylinder featuring an external R (M12x1.25) adjustment screw. Turning this screw lets you dial the extend end-position on the machine, shortening the forward stroke by up to 20 mm for a usable extend range of 0-20 mm. The retract stroke remains full length.

The short riveted body saves valuable axial mounting depth where a round-body or profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. Equipped with a built-in piston magnet (-S), this unit supports AirTAC reed or electronic switches for position sensing.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-20S Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-20S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke20 mm
Adjustable range0 – 20 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-20S

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×20Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-20S Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 0 to 20 mm on the fly to accommodate different part heights during machine changeover without fabricating new spacers.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-20S the Right Cylinder?

Choose this specific model if your fixture requires frequent on-site stroke tuning to dial in exact end positions without swapping parts.

Confirm the bore (40 mm), maximum stroke (20 mm), adjustment window (20 mm), and PT1/8 air port match your pneumatic layout. The -S code indicates the magnet is present for sensing, and the rod-end thread is female M8x1.25 (male M14x1.5 optional). Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For a held load, specify an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–20 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-20S FAQ

The theoretical maximum push is 128 kgf at 1.0 MPa. It operates at 30-500 mm/s within a pressure range of 0.15-1.0 MPa and temperatures from -20 to +70 C.

The built-in -S magnet allows you to mount AirTAC reed or electronic solid-state switches directly into the body sensor grooves for position confirmation.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X20-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X20-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.