
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X25-10 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X25-10 is a compact double-acting double-rod cylinder built for tight axial spaces. Its short riveted body saves mounting depth where larger profile cylinders fail to fit. You can dial the extend end-position on the machine between 15 and 25 mm using the external M12x1.25 adjuster screw, eliminating the need for shims or part swaps during changeovers.
Because the adjuster sets the mechanical stop rather than the piston area, output force remains identical to a standard SDA of this bore. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X25-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 25 mm |
| Adjustable range | 15 – 25 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Turn the M12x1.25 R screw to match varying jig thicknesses on the fly, avoiding teardown when switching product batches on the line.
Secure workpieces in confined machining cells where the compact riveted body saves axial depth and the fixed NBR bumper absorbs end shock.
Choose this model if your fixture requires precise on-site stroke tuning within the 15-25 mm window.
Confirm your parameters: 40 mm bore, 25 mm maximum stroke, 10 mm adjust window, and a PT1/8 port. This specific SKU lacks a piston magnet, so it cannot accept a magnetic switch; select the -S variant if you require reed or electronic sensing. Note that a plain cylinder does not hold a load on air loss or valve centring—add an external rod lock or pilot-operated check valve for secure positioning.
Quick checklist
The external M12x1.25 screw shortens the extend stroke by up to 10 mm, giving a usable range of 15 to 25 mm. Retract remains full length, and the screw acts as a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.