
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X25-10B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X25-10B is a compact double-acting double-rod cylinder featuring an external extend stop. Turning the R (M12x1.25) adjuster screw lets you dial the forward end-position between 15 and 25 mm directly on the machine, eliminating the need for shims or part swaps.
The short riveted body drastically reduces axial mounting depth where round-body or profile units will not fit. This specific SKU includes a male M14x1.5 piston rod (option B) instead of the default female thread, and lacks a piston magnet, so it cannot host reed or electronic switches. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X25-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 25 mm |
| Adjustable range | 15 – 25 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 15 to 25 mm during fixture swaps to accommodate varying part heights without machining new spacers.
Use the 10 mm adjustment window to probe the exact contact point for a 32 kg vertical lift before locking the mechanical stop.
Choose this 40 mm bore if your setup-heavy line requires on-site extend tuning between 15 and 25 mm.
Confirm the 40 mm bore, 25 mm stroke, 10 mm window, and PT1/8 port match your pneumatic supply. Remember that a plain cylinder does not hold a load when air is lost or the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For suspended loads, integrate an external rod lock or pilot-operated check valve. This SKU uses the male M14x1.5 rod end and has no magnet.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The M12x1.25 screw shortens the extend stop by up to 10 mm, giving a usable range of 15 to 25 mm. It is a mechanical stop, not a mid-stroke lock, and the cylinder will drift if air is lost. This SKU has no magnet, so it cannot take switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.