
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X25-10SH is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X25-10SH is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M12x1.25) screw lets you dial the extend end-position down from the nominal 25 mm to a 15 mm minimum directly on the machine, eliminating the need for shims or part swaps during changeovers.
This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and uses fluororubber (FKM) seals (-H) for enhanced thermal and oil resistance. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion or a locking mechanism.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X25-10SH |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 25 mm |
| Adjustable range | 15 – 25 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the extend stop from 25 mm down to 15 mm via the R screw to accommodate varying jig heights during production line changeovers without machining new spacers.
When sizing this 40 mm bore actuator, evaluate your force requirements against its neighbours.
This model is ideal for setups requiring frequent on-site stroke tuning between 15 and 25 mm. It features a 16 mm piston rod, a female M8x1.25 rod-end thread, and a PT1/8 port. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centred; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa the push is 879.6 N and pull is 738.9 N. The theoretical maximum push is 128 kgf at 1.0 MPa.
The M12x1.25 adjuster screw shortens the extend stroke by up to 10 mm, giving a usable range of 15 to 25 mm without altering the force. The built-in -S magnet allows you to mount AirTAC reed or electronic switches directly into the body sensor grooves for position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.