
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X25-20 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X25-20 is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjuster screw that dials the extend stop from 5 to 25 mm directly on your machine.
Its short riveted body drastically reduces axial mounting depth compared to traditional round-body options, fitting easily into cramped machine cells. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock without requiring tuning, and the unit operates reliably at speeds between 30 and 500 mm/s.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X25-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 25 mm |
| Adjustable range | 5 – 25 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 5 to 25 mm during quick tooling swaps to perfectly match varying part heights without machining new spacers.
Set precise mechanical stops for light-duty pin insertion tasks, relying on the fixed NBR bumper to absorb the end-of-stroke impact.
Choose this specific model if your fixture setup requires frequent on-site extend tuning across the 5-25 mm window.
Confirm your parameters: 40 mm bore, 25 mm maximum stroke, 20 mm adjust window, PT1/8 port, female M8x1.25 rod thread, and no magnet. Note that this plain cylinder lacks a piston magnet, so it cannot accept reed or electronic switches. Furthermore, it does not hold position on air loss; for suspended loads, install an external rod lock or pilot-operated check valve.
Quick checklist
Turning the external M12x1.25 screw shortens the extend stroke by up to 20 mm, allowing usable positions between 5 and 25 mm. The retract remains full, and the screw acts purely as a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.