
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X25-20SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X25-20SB is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. By turning the external R (M12x1.25) screw, you set the forward end-position anywhere between 5 and 25 mm without changing parts.
This variant includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches, plus a male-threaded M14x1.5 piston rod (-B) for secure tooling attachment. The short riveted body minimizes axial footprint, while a fixed NBR bumper decelerates the stroke end. Note that this bumper is not an adjustable air cushion, nor does the stop screw function as a mid-stroke lock.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X25-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 25 mm |
| Adjustable range | 5 – 25 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 5 to 25 mm forward clamp position on machining fixtures via the M12x1.25 adjuster to compensate for varying part tolerances.
Set precise trial insertion depths during short-run assembly changeovers, relying on the fixed NBR bumper to absorb the final end shock.
When sizing this unit, evaluate your force requirements against its neighbours.
Choose this adjustable model if your fixture requires frequent changeovers or trial positioning. It uses a PT1/8 port, operates at 30-500 mm/s, and carries the -S magnet and -B male M14x1.5 rod thread. Remember that a standard cylinder drifts when air is lost or the valve centers; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The external R (M12x1.25) screw shortens the extend stroke by up to 20 mm, yielding a usable 5 to 25 mm range. The included -S magnet allows tracking via AirTAC reed or electronic switches, while the -B denotes the male M14x1.5 rod end.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.