
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X25-30S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X25-30S is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw. Turning this R thread lets you dial the extend end-position down to 0 mm, providing on-site tuning of the extend stop without shims or part changes.
Its short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. The unit includes a built-in piston magnet (-S) for AirTAC reed or electronic switches. End shock is handled by a fixed NBR bumper that decelerates the stroke, which is not an adjustable air cushion. The bore dictates a PT1/8 air port and a 16 mm rod.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X25-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 25 mm |
| Adjustable range | 0 – 25 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 25 mm during setup to position a clamp precisely against raw castings, absorbing part variance without machining new spacers.
Fine-tune the extension depth for inserting bearings, relying on the fixed NBR bumper to decelerate the 16 mm rod as it reaches the set stop.
Choose this model when your fixture requires on-site stroke tuning during commissioning.
Confirm the 40 mm bore, 25 mm stroke, 30 mm window, PT1/8 port, built-in magnet (S), and female rod-end thread. Note that a plain cylinder does not hold its load on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For a held load without live pressure, specify an external rod lock or a pilot-operated check valve.
Quick checklist
The M12x1.25 R screw shortens the extend stop by up to 30 mm, yielding a usable extend range of 0-25 mm. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.