
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X25-30SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 25 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X25-30SB is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. Turning the external M12x1.25 adjuster screw lets you set the extend position anywhere from 0 to 25 mm without changing shims or parts.
This variant includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches, plus a male M14x1.5 threaded rod end (-B) for secure load attachment. The short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X25-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 25 mm |
| Adjustable range | 0 – 25 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 25 mm on the R screw to adapt a 40 mm bore actuator to varying jig heights during product family switchover.
Set precise metal forming limits without swapping shims, relying on the fixed NBR bumper to absorb the 32 kg safe vertical lift impact.
Choose this specific unit when you need on-site stroke tuning during frequent machine changeovers.
Confirm the 40 mm bore, 25 mm maximum stroke, 30 mm adjustment window, and PT1/8 air port match your pneumatic layout. This configuration carries the -S magnet for sensing and the -B male M14x1.5 rod thread. Note that a plain cylinder does not hold a load if air pressure drops or the valve centers; the fixed bumper only decelerates the stroke end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The M12x1.25 screw shortens the extend stop by up to 30 mm, yielding a usable 0 to 25 mm extend range. The built-in -S magnet allows tracking via AirTAC reed or electronic switches. The screw is a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.