verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X30-10SH

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X30-10SH is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 30 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke30 mm
  • Adjustable range20–30 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$59.05 $66.55Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X30-10SH

The AirTAC SDAJ40X30-10SH is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. By turning the M12x1.25 adjuster screw, you can dial the forward stroke down from its 30 mm maximum to 20 mm, hitting exact tooling positions without swapping shims or parts.

This variant includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches, plus fluororubber (FKM) seals (-H) for enhanced thermal and oil resistance. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X30-10SH Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X30-10SH
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke30 mm
Adjustable range20 – 30 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X30-10SH

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×30Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X30-10SH Is Used

packaging

Flap Folding Arms

Adjust the mechanical stop to accommodate different carton depths on the fly, relying on the FKM seals to withstand warm or oily packaging environments.

straighten

Press Fit Tuning

Micro-adjust the forward stroke limit during trial positioning runs to prevent over-travel, letting the fixed NBR bumper absorb the 879.6 N impact at 0.7 MPa.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X30-10SH the Right Cylinder?

This model is ideal for operators who need on-site stroke tuning during frequent product changeovers or trial positioning. Confirm your requirements for the 40 mm bore, 30 mm maximum stroke, 10 mm adjust window, PT1/8 port, male M14x1.5 rod thread, and the FKM seal option. Note that a plain cylinder does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 20–30 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X30-10SH FAQ

At 0.7 MPa, push increases to 879.6 N and pull to 738.9 N. The theoretical maximum push is 128 kgf at 1.0 MPa.

The M12x1.25 screw mechanically shortens the extend stroke by up to 10 mm, giving a usable range of 20-30 mm without changing the force. The built-in magnet allows you to track position using AirTAC reed or electronic switches, but the adjuster itself is just a stop, not a mid-stroke lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X30-10SH

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X30-10SH and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.