
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X30-20B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 30 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X30-20B is a double-acting compact cylinder featuring an external adjustable extend stop. Turning the R (M12x1.25) screw lets you dial the outward stroke down by up to 20 mm directly on the machine, yielding a usable extension range of 10 to 30 mm without swapping shims or parts. Retract remains full length.
The short riveted body saves axial mounting depth where round-body or profile variants will not fit. This specific SKU includes a male-thread piston rod (M14x1.5) and lacks a piston magnet, meaning it cannot accept magnetic switches. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X30-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 30 mm |
| Adjustable range | 10 – 30 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the extend stop between 10 and 30 mm to set precise clamping depth on raw castings, preventing over-travel while delivering 628.3 N of holding push at 0.5 MPa.
Quickly reposition the mechanical stop on-site when switching conveyor product sizes, using the M12x1.25 adjuster to tune the pusher stroke without changing cylinder hardware.
Choose this unit if your fixture requires frequent on-machine stroke tuning during setup or changeovers.
Confirm the 40 mm bore, 30 mm maximum stroke, and 20 mm adjust window suit your motion path. This variant features a PT1/8 port, a male M14x1.5 rod end, and no magnet. Note that a plain cylinder does not hold a load if air pressure drops or the valve centres—the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.7 MPa, push increases to 879.6 N. The theoretical maximum push is 128 kgf at 1.0 MPa.
Turning the external R (M12x1.25) screw shortens the extend stroke by up to 20 mm, giving an adjustable outward range of 10 to 30 mm. The screw acts purely as a mechanical stop and does not alter the cylinder's force output.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.