
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-10 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X35-10 is a compact double-acting double-rod cylinder featuring an external extend stop. A front R M12x1.25 adjustment screw lets you dial the extend position on the machine between 25 and 35 mm without changing parts.
Its short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. The bore uses a PT1/8 port and a 16 mm rod, while end shock is managed solely by a fixed NBR bumper. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 35 mm |
| Adjustable range | 25 – 35 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 25-35 mm extend stop during machine setup to seat new tooling precisely, avoiding the need to fabricate custom spacer shims for each fixture.
Fine-tune the actuation length on a sorting gate to accommodate different package widths on the fly, ensuring packages deflect cleanly without jamming.
Gradually adjust the downward extend position during initial prototype runs to find the exact seating depth for a bearing, preventing over-travel damage.
Choose this 40 mm bore when you need on-site stroke tuning within the 25-35 mm window. Confirm your requirements for bore, stroke, adjustment range, PT1/8 port, female rod thread, and the lack of a magnet.
Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred. The fixed NBR bumper only decelerates the stroke end, and the R screw acts as a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
Turning the R M12x1.25 screw mechanically shortens the extend end position from the 35 mm maximum down to 25 mm. It sets the physical stop and does not alter the output force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.