
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-10B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X35-10B is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. By turning the external R (M12x1.25) screw, you can dial the extend position anywhere between 25 and 35 mm without changing parts.
This specific SKU uses a male-thread M14x1.5 piston rod and a PT1/8 port. Its short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this variant lacks a piston magnet, so it cannot support reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 35 mm |
| Adjustable range | 25 – 35 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 25 and 35 mm to set exact clamping depth on raw castings without machining new spacers.
Adjust the male M14x1.5 rod outward in seconds during packaging line format changes to accommodate varying carton widths.
Use the 628.3 N extend force to probe assembly fit, tweaking the stop screw to find the optimal pressing depth before locking the setup.
Choose this unit if your fixture requires precise on-machine extend tuning between 25 and 35 mm.
Confirm your parameters: 40 mm bore, 35 mm max stroke, 10 mm adjust window, PT1/8 port, male M14x1.5 rod thread, and no magnet. The mechanical stop sets position but does not lock the load; if air pressure drops or the valve centers, the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
The external M12x1.25 screw mechanically shortens the extend stroke by up to 10 mm, giving a usable range of 25 to 35 mm. This specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you would need the -S option for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.