
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-10S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X35-10S is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw that lets you dial the extend stop down to 25 mm from a 35 mm maximum. The short riveted body significantly reduces axial mounting depth, fitting easily where round-body or profile cylinders cannot.
This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. End-of-travel deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s, making it highly versatile for dynamic assembly tasks.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 35 mm |
| Adjustable range | 25 – 35 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 25-35 mm extend stop during machine setup to accommodate different part heights without machining new spacers.
Apply 628.3 N of clamping force at 0.5 MPa while fine-tuning the rod extension to prevent crushing delicate carton materials.
It is the right choice when you need on-site extend tuning between 25 and 35 mm without changing parts.
Confirm the 40 mm bore, 35 mm stroke, 10 mm window, PT1/8 port, and the female M8x1.25 rod-end thread. The -S magnet enables position sensing, but note that a plain cylinder does not hold a load if air pressure is lost or the valve is centered; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, specify an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The M12x1.25 R screw shortens the extend stroke from 35 mm down to 25 mm on-site. The -S option provides a built-in magnet for AirTAC reed or electronic switches; it does not alter the force or lock the rod mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.