verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-10SB

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-10SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 35 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke35 mm
  • Adjustable range25–35 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$53.26 $60.76Save 12% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-10SB

The AirTAC SDAJ40X35-10SB is a double-acting compact cylinder featuring a 40 mm bore and an external R (M12x1.25) adjustment screw. This mechanism lets you dial the extend stop down by up to 10 mm on the machine, yielding a usable extend range of 25-35 mm without swapping shims or parts.

Engineered for tight layouts, the short riveted body significantly reduces axial mounting depth where a round-body or profile cylinder simply will not fit. This specific configuration includes a male M14x1.5 piston rod thread and a built-in magnet for AirTAC reed or electronic switches. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-10SB Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-10SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke35 mm
Adjustable range25 – 35 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-10SB

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×35Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-10SB Is Used

precision_manufacturing

Changeover-Heavy Machining

Dial the extend stop between 25 and 35 mm on the fly to accommodate different part lengths during production line changeovers without machining new spacers.

packaging

Variable Depth Sealing

Set precise downward travel for sealing heads on packaging equipment, tweaking the 10 mm window to compensate for varying package thicknesses on the machine floor.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-10SB the Right Cylinder?

When sizing this unit, evaluate both neighbouring bores against your actual load requirements.

Choose this adjusted-stop variant if your assembly line requires frequent changeovers or trial positioning. Keep in mind that a plain cylinder does not hold its load upon air loss or valve centring—the piston drifts, as the fixed bumper only decelerates near the end of travel. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve. Confirm your spec: 40 mm bore, 35 mm max stroke, 10 mm adjust window, PT1/8 port, male M14x1.5 rod (-B), and magnet (-S).

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–35 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-10SB FAQ

At 0.7 MPa, push increases to 879.6 N and pull to 738.9 N. The theoretical maximum push is 128 kgf at 1.0 MPa.

Turning the M12x1.25 R screw shortens the extend stroke by up to 10 mm, giving a usable range of 25-35 mm. The included -S magnet enables position sensing with AirTAC reed or electronic switches mounted in the body grooves.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-10SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X35-10SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.