
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-20 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X35-20 is a compact double-acting double-rod cylinder built for exacting extend positioning. An external M12x1.25 adjustment screw lets you dial the outward stop from 15 to 35 mm directly on the machine, eliminating shims or part swaps during changeovers. The short riveted body saves valuable axial mounting depth where a longer cylinder would fail to fit.
Because the adjuster sets the mechanical stop rather than altering the piston area, output force remains identical to a standard 40 mm bore unit. End shock is managed solely by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion or a locking brake.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 35 mm |
| Adjustable range | 15 – 35 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 15 and 35 mm to clamp varying part thicknesses on a single fixture without swapping hardware.
Adjust the downward extend stop in 1 mm increments to set precise insertion depths for light-duty press operations.
Choose it when setups require frequent trial positioning within the 15-35 mm window.
Confirm the bore, 35 mm maximum stroke, 20 mm adjustment window, and PT1/8 port. This specific SKU lacks the S magnet option, so it cannot accept reed or electronic switches; order the -S variant if sensing is required. Note that a plain cylinder does not hold position on air loss or valve centring, so deploy an external rod lock or pilot-operated check valve for suspended loads.
Quick checklist
Turning the external M12x1.25 screw mechanically shortens the extend end position from the 35 mm maximum down to 15 mm. It sets the hard stop and does not alter force, nor does it lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.