verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-20SB

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-20SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 15 to 35 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke35 mm
  • Adjustable range15–35 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$53.26 $60.76Save 12% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-20SB

The AirTAC SDAJ40X35-20SB is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw. Turning this R screw lets you dial the extend end-position anywhere between 15 and 35 mm directly on the machine, eliminating the need for shims or part swaps during changeover.

This variant includes a built-in piston magnet for AirTAC reed or electronic switches, along with a male M14x1.5 threaded rod end. The short riveted body significantly reduces axial mounting depth where a larger profile cylinder will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-20SB Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-20SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke35 mm
Adjustable range15 – 35 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-20SB

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×35Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-20SB Is Used

precision_manufacturing

Trial Positioning Jigs

Dial in the 15-35 mm extend stop during initial tooling setup to find the exact contact point for a 628.3 N press fit without machining new spacers.

sync_alt

Changeover-Heavy Lines

Quickly adjust the male M14x1.5 rod extension between product runs, accommodating different part heights while keeping the compact riveted body footprint.

vertical_align_center

Vertical Lift Stops

Set a precise mechanical lower limit for a 32 kg vertical lift payload, relying on the fixed NBR bumper to absorb the end-of-stroke shock.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-20SB the Right Cylinder?

Choose this specific model if your fixture setup requires frequent trial positioning or on-site stroke tuning within the 15-35 mm window.

Confirm the 40 mm bore, 35 mm maximum stroke, 20 mm adjust window, and PT1/8 port. This configuration includes the -S magnet for switch sensing and the -B male M14x1.5 rod thread. Remember that a plain cylinder does not hold position or load when air is lost or the valve is centered; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 15–35 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-20SB FAQ

The M12x1.25 adjuster screw shortens the extend stroke by up to 20 mm, giving a usable range of 15-35 mm; retract remains full. The built-in -S magnet allows tracking via AirTAC reed or electronic switches, and the -B code denotes the male M14x1.5 rod thread.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-20SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X35-20SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.