
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-30S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X35-30S is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. An external M12x1.25 adjuster screw lets you dial the outward stroke anywhere between 5 and 35 mm, eliminating the need for shims or part swaps during machine commissioning.
Built with a short riveted body, this unit saves valuable axial mounting depth where larger profile or round-body actuators will not fit. The 40 mm bore uses a PT1/8 air port and a 16 mm rod. End-of-travel shock is managed by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion. Equipped with a built-in magnet (-S), the cylinder supports AirTAC reed or electronic solid-state switches for precise position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 35 mm |
| Adjustable range | 5 – 35 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the outward stroke on the fly during size changeovers, ensuring the 16 mm rod meets different box profiles precisely without re-mounting the actuator.
Iteratively adjust the mechanical stop for trial probe placements, leveraging the fixed NBR bumper to decelerate the 32 kg safe vertical lift smoothly at the end of travel.
Stepping down to an SDAJ32 yields 402.1 N, whereas moving up to an SDAJ50 provides 981.7 N. Choose this specific 30 mm window model if your fixture changeovers demand frequent trial positioning.
Confirm the 40 mm bore, 35 mm maximum stroke, 30 mm adjust window, and PT1/8 porting suit your manifold. The -S suffix ensures compatibility with magnetic switches, while the female M8x1.25 rod-end thread handles attachment. Remember that a plain cylinder does not hold position on air loss or valve centering; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa.
The M12x1.25 screw shortens the extend stop by up to 30 mm, yielding a usable 5-35 mm range without changing force. The -S suffix denotes a built-in piston magnet for AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.