
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-30SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 35 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X35-30SB is a compact double-acting double-rod cylinder built for on-site extend positioning. An external M12x1.25 adjustment screw lets you dial the forward stop anywhere between 5 and 35 mm without swapping shims or components.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and features a male M14x1.5 piston rod end. The short riveted body minimizes axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 35 mm |
| Adjustable range | 5 – 35 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×35 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the male M14x1.5 rod extension on the fly to fold different box profiles without changing out pneumatic hardware.
Adjust the forward stop during product line changeovers to set precise ejection distances, relying on the fixed NBR bumper for end deceleration.
When sizing this 40 mm bore, look at both adjacent options. Choose this specific model if your fixture requires frequent on-machine stroke tuning during changeovers.
Verify your parameters: 40 mm bore, 35 mm maximum stroke, 30 mm adjust window, PT1/8 air port, -S magnet for electronic or reed sensing, and -B male M14x1.5 rod thread. Remember that a plain compact cylinder drifts when air is lost or the valve centers; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The M12x1.25 adjuster screw mechanically shortens the extend stroke from the 35 mm maximum down to 5 mm without altering the force. The included -S magnet allows tracking via AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.