verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40S

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 35 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke35 mm
  • Adjustable range0–35 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$53.26 $60.76Save 12% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40S

The AirTAC SDAJ40X35-40S is a double-acting, double-rod compact cylinder featuring an external adjustable extend stop. By turning the M12x1.25 adjuster screw, you can dial the extend position from 0 mm right up to the 35 mm maximum directly on the machine, eliminating the need for shims or part swaps.

This riveted-body design saves valuable axial mounting depth where larger profile cylinders cannot fit. It includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and relies on a fixed NBR bumper at each end to decelerate the stroke. Operating pressure ranges from 0.15 to 1.0 MPa, with a speed capability of 30-500 mm/s.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40S Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke35 mm
Adjustable range0 – 35 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40S

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×35Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40S Is Used

precision_manufacturing

Multi-Height Clamping

Dial the extend stop from 0 to 35 mm on the fly to clamp workpieces of varying thicknesses without swapping out cylinder hardware.

straighten

Trial Positioning Stops

Use the M12x1.25 adjuster screw to find the exact extension point during machine setup before locking down the final mechanical stop.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40S the Right Cylinder?

Choose this specific model if your fixture design requires frequent on-site stroke tuning to accommodate varying part heights.

Confirm the 40 mm bore, 35 mm maximum stroke, and 40 mm adjustment window suit your envelope. The air port is PT1/8, and the rod end features a female M8x1.25 thread. The included -S magnet enables position sensing. Remember that a plain cylinder does not hold its load upon air loss or valve centring; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 0–35 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40S FAQ

The M12x1.25 screw shortens the extend stop by up to 40 mm, allowing the rod to be set anywhere from 0 to 35 mm. The built-in -S magnet works with AirTAC reed or electronic switches for end-of-stroke sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X35-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X35-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.