
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-10B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X40-10B is a compact double-acting double-rod cylinder featuring a male-thread M14x1.5 piston rod and an on-site extend stop. An external R (M12x1.25) adjustment screw lets you dial the extend position anywhere between 30 and 40 mm without swapping shims or parts.
The short riveted body saves axial mounting depth where a longer profile or round-body unit will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; add the -S option if sensing is required.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 40 mm |
| Adjustable range | 30 – 40 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the male M14x1.5 rod extension between 30 and 40 mm to accommodate different carton depths while maintaining consistent cycling speed.
Gradually set the mechanical stop depth for delicate insertion tasks, leveraging the 32 kg vertical lift margin to prevent over-travel during setup.
This model suits machines requiring frequent changeovers or trial positioning where the 30-40 mm extend window earns its keep.
This SKU includes the -B male M14x1.5 rod thread and uses a PT1/8 air port. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centered—the fixed NBR bumper only decelerates near the end of travel and the R screw is a mechanical stop, not a lock. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 128 kgf at 1.0 MPa.
Turning the R (M12x1.25) screw shortens the extend stroke by up to 10 mm, giving a usable range of 30 to 40 mm; retract remains full. This specific SKU has no piston magnet, so it cannot take a switch—you must select the -S variant for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.