
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-20H is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X40-20H is a double-acting compact cylinder featuring an on-site adjustable extend stop. An external M12x1.25 adjuster screw lets you dial the forward end-position anywhere between 20 and 40 mm, eliminating the need for shims or part swaps during commissioning. This specific SKU includes fluororubber (FKM) seals for enhanced thermal and oil resistance.
Housed in a short riveted body, this unit saves axial mounting depth where round-body or profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s, and the PT1/8 porting matches the 40 mm bore specification. Note that this configuration lacks a piston magnet, so position sensing is not supported without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-20H |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 40 mm |
| Adjustable range | 20 – 40 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the 20-40 mm extend stop precisely during machine setup to set forming tool depth without machining custom spacers.
Choose the 40 mm bore when the 32 mm falls short on thrust, but the 50 mm would be physically oversized.
This model is ideal for machinery requiring frequent changeovers or trial positioning, as the M12x1.25 screw allows rapid extend-stroke tuning. Remember that a standard cylinder does not hold position upon air loss or valve centering; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve. Confirm your bore, 40 mm stroke, 20 mm window, PT1/8 port, female rod thread, and FKM seal option before ordering.
Quick checklist
The theoretical maximum push is 128 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a speed range of 30-500 mm/s.
Turning the R (M12x1.25) screw shortens the extend stroke by up to 20 mm, allowing on-site tuning between 20 and 40 mm. The screw acts purely as a mechanical stop and does not alter the output force. It is not a mid-stroke lock, and the cylinder cannot hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.