
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-30S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X40-30S is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw that dials the extend stop from 10 to 40 mm directly on your machine. A built-in piston magnet enables position sensing with AirTAC reed or electronic switches.
Its short riveted body minimizes axial mounting depth where larger profile or round-body units will not fit.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 40 mm |
| Adjustable range | 10 – 40 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 10 and 40 mm to adapt to varying jig heights during product line changeovers, avoiding the need to fabricate custom shims.
It is tailored for operators who require frequent on-machine stroke tuning during changeovers without swapping components.
Confirm your parameters: 40 mm bore, 40 mm maximum stroke, 30 mm adjust window, PT1/8 port, built-in magnet (S), and female rod-end thread. Note that a plain SDAJ does not hold position upon air loss or valve centering—the fixed bumper only decelerates near the end of travel. For vertical loads requiring hold without live pressure, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The theoretical maximum push force is 128 kgf at 1.0 MPa.
The M12x1.25 adjuster screw shortens the extend stroke by up to 30 mm, yielding a usable range of 10 to 40 mm without altering the force. The included -S magnet works with AirTAC reed or electronic solid-state switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.