verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-30SB

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-30SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 10 to 40 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke40 mm
  • Adjustable range10–40 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$54.66 $62.16Save 12% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-30SB

The AirTAC SDAJ40X40-30SB is a compact double-acting double-rod cylinder featuring an external R (M12x1.25) adjustment screw. Turning this screw lets you dial the extend end-position anywhere between 10 and 40 mm directly on the machine, avoiding part swaps or shims during changeovers. The retract stroke remains full length.

The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. This unit includes a built-in magnet (-S) for AirTAC reed or electronic switches and a male-thread piston rod (-B) M14x1.5.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-30SB Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-30SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke40 mm
Adjustable range10 – 40 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-30SB

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×40Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-30SB Is Used

precision_manufacturing

Machining Clamps

Dial the extend stop between 10 and 40 mm to set exact clamping depth on raw castings without machining custom spacers.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-30SB the Right Cylinder?

Choose this adjusted-stop version if your fixture setup requires frequent trial positioning or on-machine stroke tuning. Confirm your bore, 40 mm stroke, 30 mm window, PT1/8 port, male M14x1.5 rod, and magnet option. Note that a plain cylinder drifts when air is lost or the valve is centred; the fixed NBR bumper only decelerates near the end and is not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 10–40 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-30SB FAQ

The M12x1.25 adjuster screw mechanically shortens the extend stroke by up to 30 mm, giving a usable 10 to 40 mm range without changing force. The -S code means a built-in piston magnet is included for sensing position with AirTAC reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-30SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X40-30SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.