
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-40S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 40 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X40-40S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M12x1.25) screw, you can dial the forward end-position from 0 to 40 mm directly on your machinery, eliminating the need for shims or part changes during changeovers.
Its short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. The unit includes a fixed NBR bumper at each end to decelerate the stroke end, though this is not an adjustable air cushion or a locking brake. Equipped with a built-in piston magnet (-S), it supports AirTAC reed or electronic solid-state switches for precise end-of-stroke sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X40-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 40 mm |
| Adjustable range | 0 – 40 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×40 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 40 mm to find the exact contact depth for a 628.3 N pressing operation without machining new spacers.
Adjust the mechanical stop on-site when switching carton sizes, letting the fixed NBR bumper absorb the end shock of each new cycle.
Choose this model if your fixture setup requires frequent on-machine stroke tuning between 0 and 40 mm.
Confirm the 40 mm bore, 40 mm maximum stroke, 40 mm adjustment window, and PT1/8 port match your pneumatic supply. The -S magnet accommodates reed or electronic switches, and the rod end has a female M8x1.25 thread. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred; the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa it pushes 628.3 N and pulls 527.8 N. At 0.7 MPa it pushes 879.6 N and pulls 738.9 N. The theoretical maximum push is 128 kgf at 1.0 MPa.
The R (M12x1.25) screw shortens the extend stop by up to 40 mm, giving a usable extend range of 0-40 mm, while retract remains full. The built-in -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.