
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-10 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X45-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M12x1.25) screw lets you dial the outward stroke down from the 45 mm maximum to 35 mm directly on the machine, eliminating the need for shims or part swaps during fine-tuning.
Its short riveted body significantly reduces axial mounting depth, fitting into tight spaces where larger profile cylinders cannot. End-of-travel energy is managed by a fixed NBR bumper that decelerates the piston, which is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 45 mm |
| Adjustable range | 35 – 45 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the stroke length on-site to accommodate varying box heights, letting the fixed NBR bumper absorb the end shock for each cycle.
Choose this model if your fixture design requires on-site stroke tuning to hit a precise 35-45 mm extend position.
Confirm the 45 mm maximum stroke, 10 mm adjust window, PT1/8 port, and female M8x1.25 rod-end thread meet your spatial constraints. Remember that a plain SDAJ does not hold position if air pressure drops or the valve is centred; the fixed bumper only decelerates near the end of travel. For suspended loads, specify an external rod lock or pilot-operated check valve.
Quick checklist
The external M12x1.25 screw acts as a mechanical stop, allowing you to shorten the extend stroke from the 45 mm maximum down to 35 mm without changing parts. It does not alter the force output, and it is not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.