verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-10B

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-10B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 45 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke45 mm
  • Adjustable range35–45 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$49.54 $57.04Save 13% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-10B

The AirTAC SDAJ40X45-10B is a compact double-acting double-rod cylinder built for tight axial spaces. It features a short riveted body that saves mounting depth where a larger profile cylinder will not fit. A male M14x1.5 thread on the Ø16 mm piston rod accommodates direct external mounting.

An external R (M12x1.25) adjuster screw lets you dial the extend stop from 35 to 45 mm directly on the machine without shims.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-10B Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-10B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke45 mm
Adjustable range35 – 45 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-10B

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×45Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-10B Is Used

precision_manufacturing

Tooling Changeover

Dial the extend stop from 35 to 45 mm via the R screw to adapt a 628.3 N press motion to varying jig heights without fabricating new spacers.

packaging

Carton Flap Folding

Fine-tune the 40 mm bore stroke on-site to prevent crushing different box profiles, using the fixed NBR bumper to absorb the end shock.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-10B the Right Cylinder?

This model is ideal for setups requiring on-site stroke tuning during frequent changeovers.

This SKU includes the -B male-thread rod (M14x1.5) and lacks the -S magnet, so it cannot host reed or electronic switches. Note that a plain cylinder does not hold position on air loss; the fixed NBR bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 35–45 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-10B FAQ

The theoretical maximum push is 128 kgf at 1.0 MPa.

Turning the external M12x1.25 R screw shortens the extend end position by up to 10 mm, giving a usable extend range of 35 to 45 mm. The retract stroke remains full, and the screw acts purely as a mechanical stop, not a mid-stroke lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-10B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X45-10B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.