
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-10S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X45-10S is a double-acting compact cylinder featuring an external adjustable extend stop. An M12x1.25 adjuster screw lets you dial the forward end-position between 35 and 45 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains at the full 45 mm stroke.
The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. This unit includes a built-in piston magnet for AirTAC reed or electronic switches.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-10S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 45 mm |
| Adjustable range | 35 – 45 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M12x1.25 screw to find the exact 35-45 mm extend point for a 628.3 N clamping action during prototype runs without machining new spacers.
Adjust the mechanical stop on-site when switching product families, using the 10 mm window to tune the stroke while maintaining the 32 kg safe vertical lift capacity.
Set the extend depth precisely for carton flap folding, relying on the fixed NBR bumper to absorb the end shock at operating speeds up to 500 mm/s.
Choose this specific model when your fixture requires precise on-site stroke tuning within the 35-45 mm window.
Confirm the 45 mm maximum stroke, 10 mm adjustment window, PT1/8 port, and the female M8x1.25 rod-end thread. The -S suffix indicates a built-in magnet for position sensing. Remember that a plain cylinder does not hold position on air loss or valve centred; the fixed NBR bumper only decelerates the stroke end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The external M12x1.25 screw shortens the extend stroke by up to 10 mm, giving a usable forward range of 35-45 mm; it sets the stop without changing force. The -S suffix means a built-in magnet is present for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.