
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-20 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X45-20 is a double-acting compact cylinder featuring an external M12x1.25 adjustment screw that lets you dial the extend stop anywhere between 25 and 45 mm directly at the machine.
Its short riveted body drastically cuts axial mounting depth where a larger profile cylinder will not fit, while a fixed NBR bumper at each end handles end-of-stroke deceleration. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 45 mm |
| Adjustable range | 25 – 45 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 25-45 mm extend position during rapid fixture swaps, using the M12x1.25 screw to fine-tune contact without fabricating new spacers.
Set precise upper travel limits for lightweight 32 kg lifts, ensuring the mechanical stop prevents overtravel without needing complex controls.
Choose this 40 mm bore with a 20 mm window if your fixture requires frequent on-site stroke tuning during changeovers. Remember that a plain cylinder cannot hold a load if air pressure drops or the valve centres—the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For suspended loads, specify an external rod lock or pilot-operated check valve. Confirm your requirements for the PT1/8 port, female M8x1.25 rod thread, and the lack of a magnet.
Quick checklist
Turning the external R screw shortens the extend stroke by up to 20 mm, allowing you to set the end position anywhere between 25 mm and 45 mm. The retract stroke remains full, and the screw acts only as a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.