verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-20SB

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-20SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 45 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke45 mm
  • Adjustable range25–45 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$56.73 $64.23Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-20SB

The AirTAC SDAJ40X45-20SB is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw. Turning this R screw lets you dial the extend stop down on-site, providing a usable extension range of 25-45 mm without swapping shims or parts.

This thin riveted-body design saves valuable axial mounting depth where round-body or larger profile units will not fit. It includes a built-in piston magnet for AirTAC reed or electronic switches and a male M14x1.5 piston rod end. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-20SB Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-20SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke45 mm
Adjustable range25 – 45 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-20SB

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×45Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-20SB Is Used

precision_manufacturing

Adjustable Pressing Stops

Dial in the 25-45 mm extend position on-site to press components of varying heights without manufacturing custom spacers.

conveyor_belt

Changeover Diverters

Re-tune the stroke length quickly during product format changes to accommodate different package widths on a packaging line.

science

Prototype Positioning

Use the M12x1.25 adjuster to find the optimal extension point during R&D testing before locking down a final mechanical stop.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-20SB the Right Cylinder?

Choose this specific model if your assembly line requires frequent on-machine stroke tuning during product changeovers.

Confirm the following attributes match your requirements: 40 mm bore, 45 mm maximum stroke with a 20 mm adjustment window, and a PT1/8 air port. This configuration includes the -S magnet for solid-state or reed sensing and the -B male M14x1.5 rod thread. Note that a plain cylinder does not hold position upon air loss; the fixed bumper only decelerates the stroke end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 25–45 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-20SB FAQ

The theoretical maximum push is 128 kgf at 1.0 MPa.

The M12x1.25 screw shortens the extend stop by up to 20 mm, yielding a 25-45 mm range; retract remains full. The included -S magnet works with AirTAC reed or electronic switches for position sensing.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-20SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X45-20SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.