
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-20SH is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 25 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X45-20SH is a double-acting compact cylinder featuring an external M12x1.25 adjuster screw that dials the extend stop anywhere between 25 and 45 mm on-site. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches and utilizes fluororubber (FKM) seals for enhanced thermal and oil resistance. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed ranges from 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-20SH |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 45 mm |
| Adjustable range | 25 – 45 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 25 to 45 mm via the R screw during machine changeover to accommodate varying part heights without swapping out the entire actuator.
Leverage the FKM seals and magnetic piston to test exact insertion depths in heated processes, fine-tuning the end position live without shims.
Choose this model if your fixture requires frequent on-machine stroke tuning between 25 and 45 mm.
Confirm the PT1/8 port, the 16 mm rod with a female M8x1.25 thread, and the 20 mm adjustment window. The -S magnet enables position sensing, while the -H fluororubber seal suits harsher environments. Remember that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end of travel and does not function as a lock. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
Turning the M12x1.25 external screw shortens the extend stroke by up to 20 mm, allowing you to set the end position anywhere between 25 and 45 mm. The included -S magnet works with AirTAC reed or electronic solid-state switches for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.