verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40S

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 45 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke45 mm
  • Adjustable range5–45 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$56.73 $64.23Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40S

The AirTAC SDAJ40X45-40S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M12x1.25 adjuster screw lets you dial the outward stroke down from the 45 mm maximum to as little as 5 mm directly at the machine, eliminating the need for shims or part swaps during changeovers.

Its short riveted body drastically cuts axial mounting depth, fitting where larger profile cylinders cannot. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. This specific unit includes a built-in piston magnet (-S) for position sensing with AirTAC reed or electronic switches, and uses a 16 mm rod with a female M8x1.25 thread.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40S Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke45 mm
Adjustable range5 – 45 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40S

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×45Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40S Is Used

sync_alt

Changeover Intensive Lines

Quickly reposition the mechanical stop via the M12x1.25 screw when switching product families, avoiding teardown time while maintaining the 32 kg safe vertical lift capacity.

view_module

Trial Positioning

Use the 40 mm adjustment window to find the exact extension point for a new fixture, locking the final travel distance in place without swapping cylinder bodies.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40S the Right Cylinder?

The SDAJ40X45-45S is ideal if your setup requires on-site stroke tuning between 5 and 45 mm.

Remember that a standard cylinder does not hold position if air pressure drops or the valve is centered—the piston will drift and the fixed bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your requirements for the PT1/8 port, the -S magnet, and the female M8x1.25 rod-end thread before ordering.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 5–45 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40S FAQ

The theoretical maximum push is 128 kgf at 1.0 MPa.

The M12x1.25 screw shortens the extend stop by up to 40 mm, giving a usable range of 5 to 45 mm. The included -S magnet works with AirTAC reed or electronic switches for position detection.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X45-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.