verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40SB

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 45 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke45 mm
  • Adjustable range5–45 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$56.73 $64.23Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40SB

The AirTAC SDAJ40X45-40SB is a compact double-acting double-rod cylinder featuring an external M12x1.25 adjustment screw that dials the extend stop from 5 to 45 mm directly on your machine. The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit.

This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches and a male M14x1.5 piston rod end. End-of-stroke deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating pressure ranges from 0.15 to 1.0 MPa, with a proof pressure of 1.5 MPa and a speed range of 30-500 mm/s.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40SB Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40SB
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke45 mm
Adjustable range5 – 45 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40SB

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×45Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40SB Is Used

packaging

Carton Forming Stops

Adjust the male M14x1.5 rod end position on the fly during packaging changeovers to accommodate different box depths while maintaining rapid 30-500 mm/s cycling.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40SB the Right Cylinder?

Choose this model if your fixture requires frequent on-machine stroke tuning or trial positioning without swapping shims.

Confirm the 40 mm bore, 45 mm maximum stroke, 40 mm adjustment window, and PT1/8 air port. This unit reflects the -S magnet and -B male M14x1.5 rod thread options. Remember that a plain cylinder does not hold position if air is lost or the valve is centered; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 5–45 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40SB FAQ

The M12x1.25 adjuster screw mechanically shortens the extend stop by up to 40 mm, yielding a 5-45 mm usable range without altering force. The included -S magnet allows tracking via AirTAC reed or electronic solid-state switches mounted in the body grooves.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-40SB

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X45-40SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.