
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-50B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X45-50B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M12x1.25 screw lets you dial the outward stroke down from the 45 mm maximum right to a zero end-position on the machine, eliminating shims during changeovers.
The short riveted body drastically cuts axial mounting depth where round-body units will not fit. This specific SKU includes a male M14x1.5 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-travel deceleration is handled solely by a fixed NBR bumper, which slows the impact but does not function as an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 45 mm |
| Adjustable range | 0 – 45 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Turn the M12x1.25 adjuster to shift the outward endpoint from part A to part B in seconds, avoiding teardown while the male M14x1.5 rod pulls the tooling.
Choose this male-rod (M14x1.5) configuration when your tooling requires a threaded attachment point. Remember that a plain SDAJ cannot hold a load if air pressure drops or the valve centers—the piston will drift, as the fixed bumper only decelerates near the end of travel. For suspended loads, integrate an external rod lock or pilot-operated check valve. Confirm your required extend window (0-45 mm), PT1/8 port, and the absence of the -S magnet for your setup.
AirtacDistr lists every SDAJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj40-adjustable-cylinder
Quick checklist
The external M12x1.25 screw shortens the extend end-position by up to 50 mm from the 45 mm maximum, allowing on-machine tuning down to 0 mm. This SKU lacks the -S magnet, so it cannot accept reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.