
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-50S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X45-50S is a double-acting compact cylinder featuring an external adjustable extend stop. By turning the M12x1.25 adjuster screw, you can dial the extend position from 0 up to 45 mm directly on the machine, eliminating the need for shims or part swaps.
The short riveted body saves valuable axial mounting depth where round-body or larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Equipped with a built-in piston magnet (-S), this unit supports AirTAC reed or electronic solid-state switches for precise position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X45-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 45 mm |
| Adjustable range | 0 – 45 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 0 to 45 mm to position clamping jaws precisely on varied part sizes without fabricating custom spacers.
Fine-tune the downward travel limit during product changeovers to prevent crushing delicate containers while maintaining consistent sealing pressure.
Choose this specific model if your application requires frequent on-machine stroke tuning during setup or changeovers.
Confirm your parameters: 40 mm bore, 45 mm maximum stroke, 50 mm adjustment window, PT1/8 port, female M8x1.25 rod thread, and the -S magnet option. Remember that a plain cylinder does not hold position on air loss or when the valve is centered; the piston drifts and the bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
The M12x1.25 screw shortens the extend stop by up to 50 mm, yielding a usable extend range of 0-45 mm; it sets the stop, not the force. The built-in -S magnet works with AirTAC reed or electronic switches for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.