Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X5-10B
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X5-10B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 5 mm on the machine — no shims, no part change.
- BoreØ40 mm
- Max stroke5 mm
- Adjustable range0–5 mm
- Adjuster threadM12×1.25
- Port sizePT1/8
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X5-10B
The AirTAC SDAJ40X5-10B is a compact double-acting cylinder featuring a male-threaded M14x1.5 piston rod and an external extend stop. A fixed NBR bumper decelerates the piston near the end of travel, while the M12x1.25 adjuster screw lets you dial the extend position down to 0 mm on the machine.
The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit. This specific SKU lacks a piston magnet, so it cannot accept magnetic switches; add the -S variant if you require reed or electronic sensing. Operating speed ranges from 30-500 mm/s across a 0.15-1.0 MPa pressure range.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X5-10B Technical Specifications
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X5-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 5 mm |
| Adjustable range | 0 – 5 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X5-10B
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×5 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X5-10B Is Used
Short-Stroke Clamping
Dial the extend stop from 5 mm down to 0 mm on the fixture to clamp delicate components precisely without crushing them.
Tooling Changeover
Quickly reposition the male M14x1.5 rod end contact point during machine format changes, avoiding the need to swap shims or cylinder hardware.
Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X5-10B the Right Cylinder?
Choose this model for tight clamping setups needing exact 0-5 mm extend tuning via the PT1/8 ported body and male M14x1.5 rod end.
Remember that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts and the fixed bumper only decelerates near the stroke end. For a securely held load without live pressure, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Need on-machine stroke fine-tuning?
- ✓ Target position within 0–5 mm
- ✓ Force at your working pressure
- ✓ Access to reach the R adjuster
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the M12×1.25 adjuster after setting the stroke.
- check Avoid side load on the piston rod.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X5-10B FAQ
The M12x1.25 adjuster screw shortens the extend stop by up to 10 mm, giving a usable extend range of 0-5 mm; it sets the stop position and does not change force. This specific SKU has no piston magnet, so it cannot take magnetic switches unless you select the -S variant for reed or electronic sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAJ Cylinders
Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X5-10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.