verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-20B

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-20B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 50 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke50 mm
  • Adjustable range30–50 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$50.68 $58.18Save 12% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-20B

The AirTAC SDAJ40X50-20B is a double-acting compact cylinder featuring an external R (M12x1.25) adjuster screw that dials the extend stop directly on your machine. You can tune the usable forward stroke anywhere between 30 and 50 mm without swapping shims or parts, while the retract motion remains full length.

This 40 mm bore unit saves axial mounting depth through its short riveted body, fitting where round-body or profile cylinders cannot. It carries a male M14x1.5 piston rod thread (option B) and a fixed NBR bumper at each end to decelerate the stroke end. Note that this specific SKU lacks a piston magnet, so it cannot accept reed or electronic switches; you would need the -S variant for position sensing.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-20B Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-20B
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke50 mm
Adjustable range30 – 50 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-20B

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×50Maximum stroke length in mm.
-20Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-20B Is Used

conveyor_belt

Diverter Gate Positioning

Fine-tune the stroke end on-site during product changeovers to deflect different package sizes accurately, relying on the compact riveted body to fit tight transfer gaps.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-20B the Right Cylinder?

Choose this model when your fixture requires on-site stroke tuning between 30 and 50 mm to accommodate changeovers.

Confirm the 40 mm bore, 50 mm max stroke, 20 mm adjust window, and PT1/8 air port for your plumbing. This SKU includes the male M14x1.5 rod thread and no magnet. A plain cylinder does not hold its load if air pressure drops or the valve centers—the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 30–50 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-20B FAQ

The M12x1.25 R screw shortens the extend end position by up to 20 mm, yielding a usable 30 to 50 mm stroke. It is strictly a mechanical stop, not a mid-stroke lock, and the cylinder cannot hold a load if air is lost without an external rod lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-20B

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X50-20B and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.