
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-20SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 30 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X50-20SB is a compact double-acting double-rod cylinder built for applications requiring precise extend positioning. An external M12x1.25 adjuster screw lets you dial the forward stop down by 20 mm, yielding a usable range of 30 to 50 mm directly on the machine without swapping shims or parts.
This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male M14x1.5 threaded rod end (-B) for secure external mounting. The short riveted body minimizes axial footprint where space is tight, while a fixed NBR bumper decelerates the stroke ends. Operating pressure spans 0.15 to 1.0 MPa across a 30 to 500 mm/s speed range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-20SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 50 mm |
| Adjustable range | 30 – 50 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on-site to fold differing box heights, while the male M14x1.5 rod end drives custom folding arms securely.
Fine-tune the extend position during setup to press bearings to exact depths, relying on the fixed NBR bumper to absorb the end shock.
Choose this specific unit if your fixture requires frequent on-site stroke tuning to accommodate varying material thicknesses or trial positioning.
Confirm your parameters: 40 mm bore, 50 mm max stroke, 20 mm adjust window, PT1/8 port, -S magnet, and -B male M14x1.5 rod thread. Note that a plain compact cylinder cannot hold a load if air pressure drops or the valve centers—the fixed NBR bumper only decelerates near the end of travel and is not a lock. For suspended loads, integrate an external rod lock or pilot-operated check valve.
Quick checklist
The M12x1.25 R screw shortens the extend stroke by up to 20 mm, allowing on-machine positioning between 30 and 50 mm. The included -S magnet enables position sensing with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.