
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-30B is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X50-30B is a compact double-acting double-rod cylinder featuring an external extend stop. A front M12x1.25 adjuster screw lets you dial the forward end-position anywhere between 20 and 50 mm directly at the machine.
This variant features a male M14x1.5 piston rod thread for secure tool mounting. Its short riveted body saves valuable axial depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to an -S version.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 50 mm |
| Adjustable range | 20 – 50 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M12x1.25 screw to set the extend stop between 20 and 50 mm, perfect for fine-tuning press-fit depth on machining fixtures without swapping parts.
Set precise mechanical lower limits for lifting tasks up to 32 kg, knowing the fixed NBR bumper will absorb the end shock without requiring an adjustable cushion.
Choose this model when your assembly requires frequent on-site stroke tuning between 20 and 50 mm without changing shims.
Confirm the bore, 50 mm maximum stroke, 30 mm adjust window, and PT1/8 port. This SKU includes the -B male M14x1.5 rod end and no magnet. Remember that a standard cylinder does not hold position upon air loss or valve centering; the piston drifts and the fixed bumper only decelerates near the end. For suspended loads, install an external rod lock or pilot-operated check valve.
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
Turning the external R (M12x1.25) screw shortens the extend stroke by up to 30 mm, allowing on-site positioning between 20 and 50 mm. The screw acts only as a mechanical end stop, not a mid-stroke lock; the cylinder cannot hold a load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.