verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-30S

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-30S is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 20 to 50 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke50 mm
  • Adjustable range20–50 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$58.12 $65.62Save 11% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-30S

The AirTAC SDAJ40X50-30S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the M12x1.25 adjuster screw, you can dial the extend position anywhere between 20 and 50 mm directly on your machine, eliminating the need for shims or part swaps.

This thin riveted-body design saves valuable axial mounting depth where larger profile cylinders cannot fit. The unit includes a fixed NBR bumper at each end to decelerate the stroke, though it is not an adjustable air cushion or a mid-stroke lock. Equipped with a built-in piston magnet (-S), it supports AirTAC reed or electronic solid-state switches for precise end-position sensing.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-30S Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-30S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke50 mm
Adjustable range20 – 50 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-30S

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×50Maximum stroke length in mm.
-30Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-30S Is Used

precision_manufacturing

Changeover-Heavy Machining

Dial the extend stop from 20 to 50 mm via the M12x1.25 screw to accommodate varying part lengths on a machining line without swapping hardware.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-30S the Right Cylinder?

Confirm your requirements for a 40 mm bore, 50 mm maximum stroke, 30 mm adjust window, PT1/8 port, female M8x1.25 rod thread, and the -S magnet.

Remember that a plain pneumatic cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift. The fixed NBR bumper only decelerates motion near the stroke end and is never a lock. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve into your circuit.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 20–50 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-30S FAQ

The theoretical maximum push is 128 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and travels at speeds of 30-500 mm/s.

The external M12x1.25 screw mechanically shortens the extend end-position by up to 30 mm, giving a usable range of 20-50 mm without changing force. The included -S piston magnet works with AirTAC reed or electronic solid-state switches mounted in the body grooves for position feedback.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X50-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X50-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.