verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-10

The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-10 is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 55 mm on the machine — no shims, no part change.

  • BoreØ40 mm
  • Max stroke55 mm
  • Adjustable range45–55 mm
  • Adjuster threadM12×1.25
  • Port sizePT1/8
  • CushionFixed NBR bumper (both ends)
$52.80 $60.30Save 12% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SDAJ40 stroke, mounting and version on one page All SDAJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-10

The AirTAC SDAJ40X55-10 is a compact double-acting double-rod cylinder featuring an on-site adjustable extend stop. An external M12x1.25 adjuster screw lets you dial the forward end-position anywhere between 45 and 55 mm without swapping shims or parts.

Built with a short riveted body, this unit saves valuable axial mounting depth where longer profile or round-body actuators will not fit. Deceleration at the ends relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-10 Technical Specifications

ModelAirtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-10
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ40 mm
Max stroke55 mm
Adjustable range45 – 55 mm
Adjuster thread (R)M12×1.25
Port sizePT1/8
Acting typeDouble acting
Rod end threadM8×1.25 F / M14×1.5 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-10

SDAJCompact double-acting cylinder with adjustable stroke.
40Bore size in mm.
×55Maximum stroke length in mm.
-10Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-10 Is Used

precision_manufacturing

Changeover Dialling

Perfect for packaging lines needing rapid format swaps, letting operators twist the M12x1.25 screw to shift the 45-55 mm extend stop without changing hardware.

science

Prototype Probing

Ideal for R&D test rigs requiring trial positioning, granting a 10 mm adjustment window to find the exact touch point before finalizing a machine design.

Is the Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-10 the Right Cylinder?

Stepping down, the SDAJ32 provides 402.1 N, whereas stepping up to the SDAJ50 yields 981.7 N.

Choose this 45-55 mm adjustable model for machinery requiring frequent changeovers or trial positioning. Confirm your requirements for the PT1/8 port, the female M8x1.25 rod-end thread, and the 10 mm adjustment window. Remember that a plain cylinder drifts when air is lost or a valve centres; the fixed bumper only decelerates near the end of travel and does not function as a lock. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 45–55 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M12×1.25 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-10 FAQ

Turning the external R (M12x1.25) screw mechanically shortens the extend stop from 55 mm down to 45 mm; it does not alter force or lock mid-stroke. Because this SKU lacks a magnet, it cannot use sensing switches, and it will not hold a load if air pressure is lost without an external rod lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SDAJ40X55-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.