
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-10SB is a genuine double-acting COMPACT cylinder (Ø40mm bore) whose extend end-position is set by an external M12×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ40X55-10SB is a compact double-acting double-rod cylinder built for tight axial spaces. A short riveted body saves mounting depth where larger profile variants fail to fit.
An external R (M12x1.25) adjustment screw lets you dial the extend stop directly on the machine between 45 and 55 mm without changing parts. This specific configuration includes a built-in piston magnet for reed or electronic switches and a male M14x1.5 rod end. End shock is handled by a fixed NBR bumper, not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ40X55-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø40 mm |
| Max stroke | 55 mm |
| Adjustable range | 45 – 55 mm |
| Adjuster thread (R) | M12×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M8×1.25 F / M14×1.5 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 40 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 45-55 mm extend stop during rapid tooling changeovers to perfectly seat parts against a 32 kg vertical load without swapping shims.
Fine-tune the male M14x1.5 rod extension on the fly to accommodate varying box heights, using the fixed NBR bumper to absorb the end impact.
Leverage the 10 mm adjustment window to safely probe optimal clamping depth before locking down the sequence via an electronic switch.
Choosing this 40mm bore involves sizing against its neighbours.
Opt for the SDAJ40X55-10SB when your fixture requires on-site stroke tuning within that 45-55 mm window. The male M14x1.5 thread and -S magnet are confirmed. Remember that a plain cylinder drifts when air is lost or the valve is centred; the bumper only decelerates the stroke end. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.